Easy Operation Industrial Airless Paint Sprayer 200V 50Hz Painting Walls

When compared to spraying with compressed air, what is airless spray painting? To put it simply, Airless spray painting just uses material pressure without the air. An electric or pneumatical pump or petrol engine places the material under pressure and forces a defined amount of material at a maximum pressure of 250 bar through a tip bore. This transforms the material into a spray.

A pump is used to bring the paint material to a pressure of up to 250 bar and then through an airless spray gun. When the paint valve (gun) is opened, the paint is forced through an opening in the airless tip of the right size relevant to the requirements. Atomization is created through the pressure difference between the coating material and the atmosphere. The flow rate and spray jet width are determined by the tip.

Various materials can be sprayed using airless paint sprayers:

• Water and solvent-based paints, varnishes, lacquers, oils, separating agents
• Synthetic resin-based paints, PVC paints, 2-K lacquers
• Primers, fillers
• Fireproofing paints, corrosion protection paints
• Emulsion, latex paints, adhesives, sealants
• Masonry paint, roof linings, floor coatings, silicon resin paint
• Fillers and other high viscosity materials

Airless paint sprayers are suitable for all kinds of applications. Whether inside or out, paint and material can be applied to the following objects:

• Radiators
• Doors and windows
• Walls and ceilings
• Wood and steel constructions
• Exteriors
• Brickwork
• Roof linings

Paint roller

• + Quick cleaning
• − Paint application takes longer
• − Transporting of materials is hard work
• − Scaffolding needs to the climbed multiple times
• − Repeatedly moving material over large areas
• − Masking is also required
• − Low and uneven covering capacity on a dark surface
• − Multiple roller applications are required to cover a dark surface

Airless Paint sprayers

• − Cleaning takes longer
• + Paint application is faster
• + Material remains on the ground
• + One time on-off climb with the gun and hose onto the scaffolding
• + No material moving thanks to long hose length
• + No added work for masking
• + Good and even coverage on dark surfaces