4.5kw 3200psi Electric Airless Paint Sprayer Quick Cleaning Electric Airless Spray Machine

Worth Buying 8900 4.5kw 3200psi Electric Airless Paint Sprayer Machine Putty Sprayer Paint for Construction Sites

Zhongren ZRSM-D8900 painting machine for spraying viscous materials. This is a piston pump for airless painting, capable of working with paints and varnishes of medium and high viscosity. It is used during the application of paints and varnishes on metal structures.

Suitable for applying finishing ready-to-spray putties, enamels and primers, for anti-corrosion paints for metal. And also for working with acrylic and latex paints for walls, facades and ceilings and other viscous paints and varnishes. It is characterized by a high spray rate (8 l/min) and high power (4,000 W). It works under a pressure of 230 Bar from an electrical network with a voltage of 220 V.

When scraping putty manually, it may be slightly more troublesome when encountering such special positions as wall corners. But if you use the machine to spray putty directly, it is relatively very easy.

When you scrape the putty manually, some putty residue may fall on the ground, and the ground is dirty after the construction of the whole wall. But if you use a machine to spray, you basically do not have to worry about the putty residue falling on the ground, the wall after construction, the ground is still always clean and tidy.

When compared to spraying with compressed air, what is airless spray painting? To put it simply, Airless spray painting just uses material pressure without the air. An electric or pneumatical pump or petrol engine places the material under pressure and forces a defined amount of material at a maximum pressure of 250 bar through a tip bore. This transforms the material into a spray.

A pump is used to bring the paint material to a pressure of up to 250 bar and then through an airless spray gun. When the paint valve (gun) is opened, the paint is forced through an opening in the airless tip of the right size relevant to the requirements. Atomization is created through the pressure difference between the coating material and the atmosphere. The flow rate and spray jet width are determined by the tip.

Various materials can be sprayed using airless paint sprayers:

• Water and solvent-based paints, varnishes, lacquers, oils, separating agents
• Synthetic resin-based paints, PVC paints, 2-K lacquers
• Primers, fillers
• Fireproofing paints, corrosion protection paints
• Emulsion, latex paints, adhesives, sealants
• Masonry paint, roof linings, floor coatings, silicon resin paint
• Fillers and other high viscosity materials

Airless paint sprayers are suitable for all kinds of applications. Whether inside or out, paint and material can be applied to the following objects:

• Radiators
• Doors and windows
• Walls and ceilings
• Wood and steel constructions
• Exteriors
• Brickwork
• Roof linings

Paint roller

• + Quick cleaning
• - Paint application takes longer
• - Transporting of materials is hard work
• - Scaffolding needs to the climbed multiple times
• - Repeatedly moving material over large areas
• - Masking is also required
• - Low and uneven covering capacity on a dark surface
• - Multiple roller applications are required to cover a dark surface

Airless Paint sprayers

• - Cleaning takes longer
• + Paint application is faster
• + Material remains on the ground
• + One time on-off climb with the gun and hose onto the scaffolding
• + No material moving thanks to long hose length
• + No added work for masking
• + Good and even coverage on dark surfaces